User's Manual

Axiom Repeater

User Manual V0.3

Page | 6

1. Axiom Repeater

1.1 Introduction

Four technologies in one body: Axiom is an over-the-air repeater system that can

incorporate up to 4 technologies in one body. Current supported technologies are

LTE, Cellular, PCS and AWS band.

1.1.1 Highlights

• Can utilize up to 4 technologies simultaneously

o Covers the LTE band

 10MHz upper C block, 5MHz lower A block and 5MHz lower B

block (Add Lower A+B)

o Covers the 60 MHz PCS band

 Three independent RF PCS channels, each channel supports

1.25 MHz to 18.75 MHz bandwidth

o Covers the 25MHz Cellular band

o Covers the 45 MHz AWS band

• 25K/100K/Large Composite Output Power [24/30/43 dBm]

• 30 dB AGC Range @ 0.5 dB Step

• Adjustable AGC Output Power Level

• Band Selectable via Web-GUI

• Can Support Non-Contiguous Bands

• Supports Embedded Wireless Modem

• Supports Network Management Monitoring System via SNMP

• Adjustable FA (3 channels)

• Digital filtering

• Incremental Automatic Shutdown/Resumption Time: Axiom gradually increases

the time span between automatic shutdown and resumption before it

permanently shuts itself down

• AI compatible: Axiom is fully compatible with Applied Innovation’s monitoring

system.

• Versatility and Usability: Axiom gives total control to the user. Most of the

control parameters, e.g., gain, output power, alarm threshold, etc. can be

changed using the Web-GUI so that the user can adjust the system perfectly to

the given RF environment

• Web-GUI connectivity via DHCP

• Supports DHCP; No 3

party GUI software required

• Automated installation