User's Manual

Axiom Repeater
User Manual V0.3
Page | 27
4.2 Status Tab
 Band: Displays the bands that are currently being utilized
 Power & Gain: Displays the Input, Gain, and Output for both Downlink and Uplink
 Alarm: Displays eight (8) alarms with three different status conditions (Normal, Soft Fail
or Hard Fail).
 Message Board: Displays the 20 most recent events.
 Clear: Clears the content that is currently being displayed on the Message Board
 Log File: Downloads the system Log File (events and alarms) to your computer
 Alarm History: Downloads the Alarm History log (alarms only) to your computer
 Installation: Displays whether or not the installation routine has been run (Not Installed
or Installed)
 Modem: Displays the status of the modem
o Disabled- No internal modem is present
o Not Connected- Internal modem is detected, but no connection to the network
has been established
o Connected- Internal modem is detected and a connection to the network has
been established
 Repeater Info: Displays the serial number, latitude, longitude, firmware version, Web-
GUI version
 Modem Info: Displays the ESN (DEC), MDN, and IP Address of the internal modem
 Repeater Location: Displays the address where the repeater is installed
 Technical Support: Displays ADRF’s Technical Support contact information