User's Manual

Axiom Repeater
User Manual V0.3
Page | 15
3.2 Switches and Ports
3.2.1 Power Switch
The AC Power on/off switch is located at the back panel of repeater. The switch
should be powered on after the repeater has been installed properly.
Figure 3: Axiom Repeater Power Switch View
3.2.2 Back Up Battery Switch & Battery Port
Figure 4: Battery Switch & Battery Port
The Battery Switch can be used to provide power to the optional External Backup
Battery.
If a backup battery is utilized, please connect the battery to the unit via the
external battery port as shown in Figure 4.
(WARINING: If the Circuit Protector Switch is not turned OFF there may be a risk
of damage or electric shock)
Note: Please contact ADRF Technical Support for assistance if you are
unfamiliar with the installation procedure of our battery box.