User's Manual

Axiom Repeater

User Manual V0.3

Page | 11

3. Axiom Overview

3.1 Switches & Fault Indicators

3.1.1 MCU LEDs

Figure 1: MCU LED

 PWR(POWER)

Parameters Specifications

LED Repeater On Solid Green LED On

Repeater Off LED Off

 AC Fail

Parameters Specifications

LED Normal LED Off

d fail Solid Red LED On

Condition for Alarm Activation AC fail

 DC Fail

Parameters Specifications

LED Normal LED Off

Hard fail Solid Red LED on

Condition for Alarm Activation DC fail

After Alarm Activation Full Spectrum shutdown

 TAMP (Tamper detected)

Parameters Specifications

LED Normal Solid Green LED On

Soft fail Solid Red LED On

Condition for Alarm Activation Controlling Key parameter in normal operation

Alarm Clear Cleared by an authorized user

 RMF 1,2,3,4 (Replaceable module failure)

Parameters Specifications

LED Normal Solid Green LED On

Hard fail Solid Red LED On

Condition for indication RFU Module failure per band

 RESET (Reset engaged)

Parameters Specifications

LED Normal Solid Green LED On

Soft fail Solid Red LED On

Condition for Alarm Activation Control of Software Reset

Alarm Clear Cleared by an authorized user

 BATT(Battery)

Parameters Specifications

LED Charging Solid Red LED On

Full charged Solid Green LED On

Batt S/W off or

non- connection

LED Off