User's Manual

AEON-9030 RF Repeater
User Manual V1.0
Advanced RF Technologies, Inc. Proprietary Document Page 39 of 51
iii) If you see the icon in Figure 20, then the IP Address has been obtained. If you
see this icon and still cannot connect to the unit, then please follow the steps listed below.
Figure 20
Verify HOST/REMOTE switch is set to the HOST mode.
- When the unit is set to Host Mode, the IP address for the unit is 192.168.63.1
- When the unit is set to Remote Mode, the IP address for the unit is 192.168.63.5
Please note the only time ‘REMOTE’ mode is utilized is for modem box monitoring.