User's Manual

AEON-9030 RF Repeater
User Manual V1.0
Advanced RF Technologies, Inc. Proprietary Document Page 33 of 51
Please type in the coordinates where the repeater is installed.
Ex) Latitude: N/S (Upper Case) 034.123456
Longitude: E/W (Upper Case) 034.123456
ⓓ Modem Box Settings: Will display the Repeater’s Static IP Address, Subnet
Mask, and Gateway. This information is necessary when using the Repeater in
conjunction with an External Modem Box. Default values are:
Repeater IP: 192.168.63.5
Subnet Mask: 255.255.255.0
Gateway: 192.168.63.254
ⓔ Auto Installation
Click the
Install button to automatically setup the repeater.
It may take up to 3 minutes to complete the process. You will see a gradual
progress bar display. After the process is completed, a pop-up window will
display a “Installation Successfully Completed” message.
After the Installation Routine is complete, click on the
Status tab and the
Installation box should have changed from “Not Installed” to “Installed”.
If the AEON-9030 detects a problem during the installation process, a pop-up
message will appear stating the issue, e.g., “Modem is not detected.” Please
follow the instructions and address the problem to finish the installation process.
If the problem persists, please contact our technical support.
 Repeater Location Info