User's Manual

AEON-9030 RF Repeater
User Manual V1.0
Advanced RF Technologies, Inc. Proprietary Document Page 27 of 51
- Alarms: The unit will display seven alarms with three different status
conditions (Normal, Soft Fail or Hard Fail).
- Message Board: Displays the 20 most recent log messages (Alarms &
Heartbeats).
- Installation: Displays the repeater’s installation status (Not Installed or
Installed).
- Repeater Info: Displays the repeater’s serial number, and location
information (latitude and longitude coordinates).
- Repeater Location: Displays the address where the repeater is installed
- Technical Support: Displays ADRF’s technical support contact information.
- Installer Contact Info: Displays the installer’s name, phone and e-mail
address.
- Modem (only applicable if a wireless modem is connected to the repeater):
The Auto Connection box needs to be checked when the wireless modem is
installed inside the repeater. A wireless modem is used in order to send the
alarms and the heartbeat over the air to the Wireless Provider’s NOC.
Note: Once successfully logged in, the repeater model name and the site/cascade
ID will be displayed on the top left of all the windows.