User's Manual

AEON-9030 RF Repeater
User Manual V1.0
Advanced RF Technologies, Inc. Proprietary Document Page 25 of 51
In this window, the user can view the following:
(To change any parameters, e.g., Channel frequency, bandwidth, Gain
Settings, AGC Level, etc., you must go to the Install or the Control
window.)
- CDMA Band: Will display the center frequencies of the 1900 MHz filtered
BWs on the downlink and uplink respectively.
- Cellular Band: Will display the center frequencies of the 800 MHz filtered BWs
on the downlink and uplink respectively.
- Power & Gain: Will display the repeater’s input, gain and output power on the
downlink and uplink.