User's Manual

AEON-9030 RF Repeater

User Manual V1.0

Advanced RF Technologies, Inc. Proprietary Document Page 15 of 51

2.1.2 AC Power Switch

The AC Power on/off switch is located on the inside and bottom of repeater

(Figure 9). The switch should be powered on after the repeater has been

installed properly.

2.1.3 Back Up Battery Switch & Battery Port

The Battery Switch can be used to provide power to the optional External

Backup Battery.

If a backup battery is utilized, please connect the battery to the unit via the

external battery port as shown in Figure 10.

(WARINING: If the Circuit Protector Switch is not turned OFF there may be a risk of

damage or electric shock)

Note: Please contact ADRF Technical Support for assistance if you are unfamiliar with the

installation procedure of our battery box.

ure 9: AC Power Switch

ure 10: Batter

Switch & Batter