User's Manual
Table Of Contents
- Introduction of Epoch-M1P
- Overview
- Warnings and Hazards
- Epoch-M1P Parts List
- Epoch-M1P Software Installation and Requirements
- 1.4.1 Minimum PCS Requirements
- 1.4.2 Epoch-M1P Software Installation
- ** Refer to the Software Setup Guide
- ** Refer to the USB Setup Guide
- Pre-Installation using Epoch-M1P Software
- Step by Step Instructions for Installation
- User Manual V1.0 using Epoch-M1P Software
- Menu Structure
- Using the Epoch-M1P Software
- Alarms
- Default Control Settings
- Maintenance Guide for Epoch-M1P
- Periodic Inspection Checklist
- Preventive Measures for Optimal Operation
- Troubleshooting
- Tx & Rx LEDs
- Common Installation Problems
- Warranty and Repair Policy
- General Warranty
- Limitations of Warranty
Epoch-M1P RF Repeater
User Manual V1.0
1.3 Epoch-M1P Parts List
The Epoch-M1P repeater system includes:
PART ID
QUANTITY
a. Epoch-M1P Repeater EPOCHMIPXX 1
b. Screws SC01 4
c. **CD M100OMS V1.XX01 1
d. USB Cable USB01 1
e. Power Cable PWRC01 1
** CD includes: (1) Software; (2) User Manual; (3) M1P Setup Quick Start Guide;
(4) USB Cable Setup Quick Start Guide; & (5) Software Setup Quick Start Guide.
1.4 Epoch-M1P Software Installation and Requirements
1.4.1 Minimum PCS Requirements
CPU: 200 MHz
Memory: 32 MB
Hard Disk: 10 MB (Free Space)
USB Port: 1 USB Port
CD-ROM Drive
Actual separation distance is determined upon gain of antenna used.
RF EXPOSURE & ANTENNA PLACEMENT Guidelines
Please maintain a minimum safe distance of at least 20 cm while operating near the
donor and the server antennas. Also, the donor antenna needs to be mounted
outdoors on a permanent structure.
Opening or tampering the Epoch-M1P will void all warranties.
WARRANTY
Advanced RF Technologies, Inc. Proprietary Document Page 9 of 38