User's Manual
Table Of Contents
- Introduction of Epoch-M1P
- Overview
- Warnings and Hazards
- Epoch-M1P Parts List
- Epoch-M1P Software Installation and Requirements
- 1.4.1 Minimum PCS Requirements
- 1.4.2 Epoch-M1P Software Installation
- ** Refer to the Software Setup Guide
- ** Refer to the USB Setup Guide
- Pre-Installation using Epoch-M1P Software
- Step by Step Instructions for Installation
- User Manual V1.0 using Epoch-M1P Software
- Menu Structure
- Using the Epoch-M1P Software
- Alarms
- Default Control Settings
- Maintenance Guide for Epoch-M1P
- Periodic Inspection Checklist
- Preventive Measures for Optimal Operation
- Troubleshooting
- Tx & Rx LEDs
- Common Installation Problems
- Warranty and Repair Policy
- General Warranty
- Limitations of Warranty
Epoch-M1P RF Repeater
User Manual V1.0
1. Introduction of Epoch-M1P
1.1 Overview
Epoch-M1P series repeaters enhances in-building wireless coverage in the most
effective and cost efficient way. For its intelligent design and versatility, Epoch-
M1P series repeaters is the ideal choice for wireless coverage problems indoors.
Epoch-M1P series repeaters can be used as a stand-alone repeater with passive
antennas connected to it or it can also be used as a feeder repeater to a DAS
(Distributed Antenna System).
1.1.1
1.1.2
Highlights
• 20 dBm Composite Output Power
• 80 dB gain
• 25 dB AGC Range @ 0.5 dB Step
• Can Set AGC Output Power Level
• Band/Channel Selectable via Software
• Can Support Non-Contiguous Bands
• Supports Embedded Wireless Modem
• Supports Network Management Monitoring System via SNMP
• Supports Auxiliary Alarming for a DAS or a Third-Party Repeater
Special Features
Figure 1 – Front & Right Side Views of the Repeater
Advanced RF Technologies, Inc. Proprietary Document Page 5 of 38