User's Manual
Table Of Contents
- Introduction of Epoch-M1P
- Overview
- Warnings and Hazards
- Epoch-M1P Parts List
- Epoch-M1P Software Installation and Requirements
- 1.4.1 Minimum PCS Requirements
- 1.4.2 Epoch-M1P Software Installation
- ** Refer to the Software Setup Guide
- ** Refer to the USB Setup Guide
- Pre-Installation using Epoch-M1P Software
- Step by Step Instructions for Installation
- User Manual V1.0 using Epoch-M1P Software
- Menu Structure
- Using the Epoch-M1P Software
- Alarms
- Default Control Settings
- Maintenance Guide for Epoch-M1P
- Periodic Inspection Checklist
- Preventive Measures for Optimal Operation
- Troubleshooting
- Tx & Rx LEDs
- Common Installation Problems
- Warranty and Repair Policy
- General Warranty
- Limitations of Warranty
Epoch-M1P RF Repeater
User Manual V1.0
MECHANICAL SPECIFICATIONS
PARAMETERS SPECIFICATIONS COMMENTS
Housing (W x H x D) 8.27 x 11.03 x 3.57 inches
Housing Material Aluminum & Plastic
Weight ≤ 13.22 lbs
Antenna N-Type (Female)
Dry Contact RS-232 (Female)
Connector
Type
NMS Control USB / RS-232 (Female)
Cooling External Convection
POWER SPECIFICATIONS
PARAMETERS SPECIFICATIONS COMMENTS
Main AC Power 100 to 240 VAC
AC Frequency 45 to 65 Hz
Power Adapter shall
comply with UL & CE
Adaptor Voltage & Current 6 VDC / 4.5 A
Power Consumption ≤ 30 Watts
ENVIRONMENTAL SPECIFICATIONS
PARAMETERS SPECIFICATIONS COMMENTS
Operating Temperature +41 ˚F to +113 ˚F
Storage Temperature +23 ˚F to +176 ˚F
Humidity 10 to 85%, RH
MTBF 75,000 hours
Advanced RF Technologies, Inc. Proprietary Document Page 34 of 38