User's Manual

Epoch-S02-19001W RF Repeater
User Manual V1.0
Advanced RF Technologies, Inc. Proprietary Document Page 13 of 32
12. Select the Desired Band or Bands
Select the desired band or bands by clicking the appropriate buttons.
You can deselect the undesired band or bands by clicking the button
again. You can select among 15 band combinations; A, B, C, D, E, F, AD,
AE, AF, BD, BE, BF, CD, CE or EF. Neither two 5 MHz bands (e.g. DE, DF,
etc.) nor two 15 MHz bands (e.g. AB, AC, etc.) are allowed. The default
band is A.
Control Item Action Setting Value
15 MHz Band Band Selection A/B/C
5 MHz Band Band Selection D/E/F
** Only one 15 MHz band and one 5 MHz band can be chosen
simultaneously (i.e. A and D, B and E, etc.; not A and B, E and F, etc.).
** If a wireless modem is not connected, skip steps 13 through 15 and
proceed to step 16.
13. Provide SNMP Information
Type in the Site ID and the Manager IP address as given to you by the
Wireless Provider. Once both the parameters are typed in, you must click
“Set” for it to be executed.
Figure 4 - Installation Window of the Epoch-S02 1W OMS V1.XX
Table 1 - 15 MHz and 5 MHz Band Options