User's Manual
Table Of Contents
- Installation Guide for Epoch-S02
- Environmental requirements
- Warnings and Hazards
- Tools and Recommendations for Installation
- Epoch-S02 Parts List
- Step by Step Instructions for Installation
- User Manual V1.1 using OMS V4.01
- Menu Structure
- Using the Epoch-S02 OMS V4.01
- Alarms
- Default Control Settings
- Maintenance Guide for Epoch-S02 OMS V4.01
- Periodic Inspection Checklist
- Preventive Measures for Optimal Operation
- Troubleshooting
- Epoch-S02 OMS V4.01 Scenarios
- Heartbeat Scenarios
- Warranty and Repair Policy
- General Warranty
- Specific Product Warranty Instructions
- A.1 Minimum Requirements
- A.2 Epoch-S02 OMS V4.01 Installation/Startup
- Appendix B: Specifications
Epoch-S02 RF Repeater
User Manual V1.1
Appendix B: Specifications
B.1 Repeater Specifications
ELECTRICAL SPECIFICATIONS
PARAMETERS SPECIFICATIONS COMMENTS
FL 1930 to 1990 MHz Frequency
Range
RL 1850 to 1910 MHz
Sub Band Filtering 5 MHz, 15 MHz, or 20 MHz A, D, B, E, F, C, AD, AE, AF,
DB, DC, BE, BF, EC or FC
Operating Frequency Programmable
Frequency Error ≤ +/- 0.1 ppm
System Delay ≤ 5 usec Each Direction
Receiver Dynamic Range -85 to -45 dBm
Maximum Adjacent Band
Signal Level
-45 dBm @ Isotropic Antenna
Repeater Gain 50 to 90 dB
Maximum FL and RL Output
Power
+24 dBm Composite
FL AGC Range 40 dB
RL AGC Range 40 dB
AGC Step Size 0.5 dB
Gain Linearity ≤ +/- 1.0 dB
Gain Flatness ≤ 2.5 dB
Total PA Power Variance ≤ +/- 0.5 dB
≤ -45 dBc @ Fc +/- 885 KHz
In Band Noise
≤ -50 dBc @ Fc +/- 1.98 MHz
Spurious Emission < -13 dBm @ Fc +/- 2.25 MHz
Rho Factor ≥ 0.912
Noise Figure Typical 4 dB @ Maximum Gain
VSWR ≤ 1.5:1
Advanced RF Technologies, Inc. Proprietary Document Page 30 of 31