User's Manual

Epoch-S02 RF Repeater
User Manual V1.1
5 Warranty and Repair Policy
5.1 General Warranty
Advanced RF Technologies, Inc. warrants to the original purchaser all standard
products sold by Advanced RF Technologies, Inc. to be free of defects in material
and workmanship for the duration of the warranty period of one (1) year from date
of shipment from Advanced RF Technologies, Inc. During the warranty period, at
our option, is limited to repair or replacement of any product that Advanced RF
Technologies, Inc. proves to be defective. This warranty does not apply to any
product, which has been subject to alteration, abuse, improper installation or
application, accident, electrical or environmental over-stress, negligence in use,
storage, transportation or handling.
5.2 Specific Product Warranty Instructions
All Advanced RF Technologies, Inc. repeaters are manufactured to high quality
standards and are warranted against defects in workmanship, materials and
construction, and to no further extent. Any claim for repair or replacement of a
device found to be defective on incoming inspection by a customer must be made
within 30 days of receipt of the shipment, or within 30 days of discovery of a defect
within the warranty period.
This warranty is the only warranty made by Advanced RF Technologies, Inc. and is in
lieu of all other warranties, expressed or implied, except as to title, and can be
amended only by a written instrument signed by an officer of Advanced RF
Technologies, Inc. Advanced RF Technologies, Inc. customer support
representatives are not authorized to make commitments on warranty returns.
In the event that it is necessary to return any product against the above warranty,
please contact the Customer Support Department via e-mail @
[e-mail] or by calling [phone].
Note: Advanced RF Technologies, Inc. test reports or data indication mean-time-
between failure or other reliability data are design guides and are not intended to
imply that individual products or samples of products will achieve the same results.
These numbers are to be used as management and engineering tools, and are not
necessarily indicative of expected field operation. These numbers assume a mature
design, good parts, and no degradation of reliability due to manufacturing
procedures and processes.
Advanced RF Technologies, Inc. Proprietary Document Page 28 of 31