User's Manual

Epoch-S02 RF Repeater
User Manual V1.1
structure. The asterisk “*” denotes parameters that apply to both uplink
and downlink.
Control Menu
General Alarm
Setting Setting
Load Default Periodic Time
Manual Gain Control* RF Power
Uplink Tracking Offset RSSI*
Input Overload*
Figure 2.2.1 Variable Parameters in the Epoch-S02 OMS V4.01
2.3 Alarms
The screen shot of the Alarms Window below, can be viewed by clicking the
Alarm
button on the “Main Status Window.” If a soft fail should occur, the alarm of
concern would be highlighted in yellow. In the same manner, the corresponding
hard fail alarm would be highlighted in red. In order to find out what is causing the
alarm(s), simply place the mouse cursor over the highlighted yellow or red alarm box
and a pop up window will appear, displaying the threshold value and the current
measured value. To update the Alarm window, click the “Refresh” button.
Advanced RF Technologies, Inc. Proprietary Document Page 22 of 31