User's Manual
Table Of Contents
- Installation Guide for Epoch-S02
- Environmental requirements
- Warnings and Hazards
- Tools and Recommendations for Installation
- Epoch-S02 Parts List
- Step by Step Instructions for Installation
- User Manual V1.1 using OMS V4.01
- Menu Structure
- Using the Epoch-S02 OMS V4.01
- Alarms
- Default Control Settings
- Maintenance Guide for Epoch-S02 OMS V4.01
- Periodic Inspection Checklist
- Preventive Measures for Optimal Operation
- Troubleshooting
- Epoch-S02 OMS V4.01 Scenarios
- Heartbeat Scenarios
- Warranty and Repair Policy
- General Warranty
- Specific Product Warranty Instructions
- A.1 Minimum Requirements
- A.2 Epoch-S02 OMS V4.01 Installation/Startup
- Appendix B: Specifications
Epoch-S02 RF Repeater
User Manual V1.1
2.1.4 Installation
For information regarding the use of the Epoch-S02 OMS V4.01 in Installation,
refer to Section 1.5.1, “Repeater Installation” (Starting at number 9).
2.1.5 System Information
The System Information Menu Option displays the Model Number, Serial Number,
Firmware Version, Manufacturing Date, and Repeater Installation Date/Time.
Contact information is included along with a link to Advanced RF Technologies,
Inc.’s URL.
Figure 2.1.5 Info. Window of the Epoch-S02 OMS V4.01
2.2 Using the Epoch-S02 OMS V4.01
2.2.1 Changing Parameters
In changing the parameters of the repeater via use of the Epoch-S02 OMS
V4.01, note that the values entered into the OMS V4.01 are limited to the
ranges and modes specified in the Menu Structure section.
The Organizational Chart below shows (alphabetically) the parameters
that can be changed and the location of each parameter in the menu
Advanced RF Technologies, Inc. Proprietary Document Page 21 of 31