User's Manual
Table Of Contents
- Installation Guide for Epoch-S02
- Environmental requirements
- Warnings and Hazards
- Tools and Recommendations for Installation
- Epoch-S02 Parts List
- Step by Step Instructions for Installation
- User Manual V1.1 using OMS V4.01
- Menu Structure
- Using the Epoch-S02 OMS V4.01
- Alarms
- Default Control Settings
- Maintenance Guide for Epoch-S02 OMS V4.01
- Periodic Inspection Checklist
- Preventive Measures for Optimal Operation
- Troubleshooting
- Epoch-S02 OMS V4.01 Scenarios
- Heartbeat Scenarios
- Warranty and Repair Policy
- General Warranty
- Specific Product Warranty Instructions
- A.1 Minimum Requirements
- A.2 Epoch-S02 OMS V4.01 Installation/Startup
- Appendix B: Specifications
Epoch-S02 RF Repeater
User Manual V1.1
16. Check the Front LED Panel
Check that the Power LED is on (green) and neither Soft Fail LED (yellow)
nor Hard Fail LED is on (red).
** In the case where either soft fail or hard fail is on, refer to Section 2.3.
** You can go to the Status Window of the OMS V4.01 p ogram to view
the basic parameters of the repeate once the repeate has installed
successfully.
r
r r
17. Lock the Epoch-S02 Door
Now you can lock the door using the key provided.
CONGRATULATIONS!! The Epoch-S02 Installation process is complete.
The Epoch-S02 is now extending coverage!
Advanced RF Technologies, Inc. Proprietary Document Page 13 of 31