User Manual

Verizon Wireless MPE25K RF Repeater
User Manual V0.3
Advanced RF Technologies, Inc. Proprietary Document 28/59
In this window, the user can adjust the following parameters:
General Setting
- Automatic Gain Control (Default mode is On)
- Downlink HPA on/off (Default mode is On)
- Uplink HPA on/off (Default mode is On)
- Uplink Tracking mode on/off (Default mode is Off)
Manual Gain Control
- Downlink Gain Control
Cellular: 42 to 72 dB @ 0.5 dB step, default value: 72 dB
PCS: 51 to 81 dB @ 0.5 dB step, default value: 81 dB
- Uplink Gain Control
Cellular: 42 to 72 dB @ 0.5 dB step, default value: 72 dB
PCS: 51 to 81 dB @ 0.5 dB step, default value: 81 dB
- Downlink AGC Level
Cellular: -5 to 15 dBm @ 0.5 dB step, default value: 15 dBm
PCS: 1 to 21 dBm @ 0.5 dB step, default value: 21 dBm
- Uplink AGC Level
Cellular: -12 to 8 dBm @ 0.5 dB step, default value: 8 dBm
PCS: -12 to 8 dBm @ 0.5 dB step, default value: 8 dBm
- EVDO Offset
-3 to +3 dB @ 0.5 dB step, default value: 0 dB
When Uplink Tracking is off,
the EVDO Offset value is applied and with AGC ON,
the maximum permissible Gain of the Uplink Gain Range is Downlink Gain +
EVDO Offset. However, the gain cannot exceed the standard Max Gain.
When Uplink Tracking is ON, the Tracking Offset is applied and with AGC ON, the
Uplink Gain is the Downlink Gain + EVDO Offset. As expected, the gain cannot
exceed the standard Max Gain.