User Manual

Verizon Wireless MPE25K RF Repeater
User Manual V0.3
Advanced RF Technologies, Inc. Proprietary Document 13/59
2.2 Switches & Indicators
2.2.1 LEDs
ADRF-25K has LEDs on the front panel of the repeater as shown below in
Figure 4.
z POWER LED
Parameters Specifications
Repeater On Green LED on LED
Repeater Off Green LED off
z DC-ALARM LED
Parameters Specifications
Normal Red LED off
Soft fail Green LED on
LED
Hard fail Red LED on
Condition for Alarm
Activation
Current > 9A (Hard Fail)
Current < 2A (Soft Fail)
After Alarm Activation Full Spectrum (PCS/Cellular) shutdown
z OVER POWER LED
Parameters Specifications
Normal LED off
Soft fail PCS(Cellular) Green LED on
LED
Hard fail PCS(Cellular) Red LED on
Soft fail Max power +1 <measured output < max power+2 Condition
for Alarm
Activation
Hard fail measured output > max power + 2
Soft fail Only the alarm is activated and the repeater
operates as normal
Following
Alarm
Activation
Hard fail The function associated with the alarm shuts
down, and the shutdown process goes into effect
Figure 4 – ADRF25K Repeater LED View