User`s manual

3. INSTALLATION
WOL (Wake On LAN)
The WOL header is used for remote wakeup of the computer through a network.
WOL requires a PCI add-in network interface card (NIC) with remote wakeup
capabilities. The remote wakeup header on the NIC must be connected to the
onboard Wake on LAN header. For Wake on LAN, the 5-V standby line for the
ATX power supply must be capable of delivering 5V±5% at 720mA.
CPU Fan
Your Pentium Cartridge may have an attached heatsink and Fan which would
utilize this connector for the CPU Fan.
CD-IN Connector (Audio)
A 1x4 connector is built into the IN5598 motherboard for audio input from CD-
ROM drives.
Feature Connector
The VESA feature connector is available for synchronizing graphics output with
an external NTSC or PAL signal, and will allow a shared frame buffer interface
to maximize Multimedia performance. The feature connector will use pass-
through signals from a video add-in card to utilize the system’s VGA circuitry.
The IN5598 motherboard also supports other VESA standards such as the
“VESA DPMS protocol” to switch a DPMS compliant monitor into power
savings mode and the “VESA Bi-directional Monitor Data”, (DDC-2), that
allows the transfer of monitor identification and resolution supported data for
ease of use.