User`s manual

3. INSTALLATION
3.2 CPU (Central Processing Unit)
The Pentium P54C/P55C, Cyrix 6X86L/MX/MII, IDT-C6, AMD-K5/K6 processors
have various voltage choices depending on the CPU suppliers. Also this motherboard
can be upgraded with Pentium processors that run at higher speeds. When upgrading
the processor, use the BIOS configuration mode to change the processor speed.
To complete CPU installation, please install CPU to socket firmly and arrange jumper
settings carefully, presented in sec. 3.2.1 and 3.2.2.
3.2.1 Install CPU
The following steps detail how to install your CPU and configure the types, voltage and
speed according to the “Processor Jumper Setting List”.
Step 1: Pull the handling bar of the socket upward to the other end to loosen the
socket’s openings.
Step 2: Place the CPU on the middle of the socket, orienting its beveled corner to
line up with the socket’s beveled corner. Make sure the pins of the CPU fit
evenly to the socket openings.
Handling
Bar
Step 1: Pull handling bar Step 2: Place CPU