User's Manual

24
B. STATUS LIGHT INDICATORS & WARNINGS
1. Transmitter STATUS Light Indication
Type Display Type Indication
Voltage below 2.3V at initial power on,
transmitter shuts off, change batteries
1
Constant red
Voltage below 1.8V during operation,
transmitter shuts off, change batteries
2
Blinking red
“on” → 0.15 second
“off” → 1.85 seconds
Voltage below 2.2V during operation, warning,
change batteries suggested
3
2 red blinks followed by a
1.85-second pause (off)
The pushbutton
jammed or defective
4
3 red blinks followed by a
1.85-second pause (off)
EEPROM error
5
4 red blinks followed by a
1.85-second pause (off)
Transmitting error, system can not locked on
to the designated channel
6
Constant green for 2 seconds
Transmitter power on prior to initiating the
START function
7
Blinking green at every 2-second
interval
When pushbutton is pressed, signal transmitted
8
Blinking red
“on” → 1.0 second
“off” → 1.0 second
Stop command initiated with MAIN
disconnected