User's Manual

18
4. Jumper Settings
Jumper settings are applied to functions such as MAIN cutoff time, system startup and
transmitter push button layout. The jumpers are located on top of the dip-switches.
Fig. 11
Jumper Settings Function
JP1
(Blank)
JP2
(Blank)
Receiver MAIN never deactivates unless transmitter power is turned off or
emergency stop command is initiated
JP1
(Inserted)
JP2
(Blank)
Receiver MAIN deactivates automatically after 5 minutes of inactivity.
JP1
(Blank)
JP2
(Inserted)
Receiver MAIN deactivates automatically after 30 minutes of inactivity.
JP1
(Inserted)
JP2
(Inserted)
Receiver MAIN deactivates automatically after 60 minutes of inactivity.
JP4
(Blank)
JP5
(Blank)
Normal right-to-left push button configuration
JP4
(Blank)
JP5
(Inserted)
In-line push button configuration (top to bottom)