User's Manual

13
1 2 3 4 5 6 7 8
1-Stage Toggle + 3-Stage Selector Switch Combination - Continued
107 01101011 1 C/3&4
108 01101100 1 D/3&4
109 01101101 1 2 A/3&4
110 01101110 1 2 B/3&4
111 01101111 1 2 C/3&4
112 01110000 1 2 D/3&4
113 01110001 1 A/3&4
114 01110010 1 B/3&4
115 01110011 1 C/3&4
116 01110100 1 D/3&4
117 01110101 1 2 A/3&4
118 01110110 1 2 B/3&4
119 01110111 1 2 C/3&4
120 01111000 1 2
D/3&4
B. RECEIVER UNIT
1. System Channel Setting
Fig. 09
Set the receiver channel simply by adjusting the channel dip-switch located on the receiv ing board located
inside the receiver unit. The system channel table located on page 19 will tell you which dip setting
correspond to which channel. Do make sure that when you change the channel of the receiver you must
also change the channel of the transmitter as well. The channel on both transmitter and receiver must be
identical in order for the system to work.