User's Manual

FLEX MINI System Instruction Manual
January 2014
14 of 16
5. STATUS & WARNINGS
Transmitter Status Light Indication
Type Display Type Indication
1
1 red blink
Transmitter low battery
Change battery immediately
2
Constant red Transmitter power off due to low battery condition
3
2 red blinks
Pushbutton jammed or defective
(for keypad type #2 & type #3 setups only)
4
Green blinks Transmission in progress
5
1 green blink every 4 seconds
Transmitter on standby
(for keypad type #2 & type #3 setups only)
Note on Type-3 above: A jammed or defected button is shown by 2 red blinks on the Status LED when pressed. For
example, when 2 red blinks are shown on the Status LED, press all buttons one at a time to see which one is jammed or
defective. A good working button will not display any lights on the Status LED when pressed while a jammed or defected
button will blink 2 red when pressed.
Receiver Status Light Indication
Type Display Type Indication
1
Fast green blinks Decoding in process
2
Slow green blinks Decoding on standby
3
Constant red Receiver Low voltage