Manualshelf

User's Manual

ManualsBrandsAdvanced Radiotech ManualsElectronicsIndustrial radio remote control systems
9101112131415161718
FLEX MINI System Instruction Manual
January 2014
12 of 16
WALL
WALL
Secure the mounting bracket to the wall or equipment via two screws (not provided with the
system). Slide down the receiver along the guided track to secure the receiver to the mounting
bracket (see below). Make sure the screws are tightened after installation.
→
Remove the receiver by pressing down the bracket release and pull the receiver upward until it
clears the guided track (see below).