User's Manual

Page 25
CH SCAN
>ALL ALL
>BACK
>01
CH SCAN
>02
CH SCAN
>03
CH SCAN
>CH SCAN
ALL ABCDEFGH
>TYPE:
>CH SCAN
ALL
>ALL
CH SCAN
>ALL
CH SCAN CH SCAN
4.2.4 Receiver Channel Scanning
PS1 button is the “Enter” or “Change” command.
PS2 button is the “Next” command.
Select “01” the receiver only scans the channel set on section 4.2.3.
Select “02” the receiver scans the channel set on section 4.2.3 plus the next channel up (scans
channel N and channel N+1).
Select “03” the receiver scans the channel set on section 4.2.3 plus the next two channels up
(scans channel N, channel N+1 and channel N+2).
Select “ALL” the receiver scans all 62 channels.