User's Manual

Flex 12ES/EX Standard, AB and Tandem Instruction Manual
September 2016
Page 17 of 43
Function
Number
Display Type PB9 PB10 PB11 PB12
83
8 Greens + 3 Reds Normal Normal A/1&2 Normal
84
8 Greens + 4 Reds Normal Normal B/1&2 Normal
85
8 Greens + 5 Reds Normal Normal C/1&2 Normal
86
8 Greens + 6 Reds Normal Normal D/1&2 Normal
87
8 Greens + 7 Reds Normal Normal Normal A/3&4
88
8 Greens + 8 Reds Normal Normal Normal B/3&4
89
8 Greens + 9 Reds Normal Normal Normal C/3&4
90
9 Greens Normal Normal Normal D/3&4
91
9 Greens + 1 Red Normal Normal A/1&2 A/3&4
92
9 Greens + 2 Reds Normal Normal A/1&2 B/3&4
93
9 Greens + 3 Reds Normal Normal A/1&2 C/3&4
94
9 Greens + 4 Reds Normal Normal A/1&2 D/3&4
95
9 Greens + 5 Reds Normal Normal B/1&2 B/3&4
96
9 Greens + 6 Reds Normal Normal B/1&2 C/3&4
97
9 Greens + 7 Reds Normal Normal B/1&2 D/3&4
98
9 Greens + 8 Reds Normal Normal C/1&2 C/3&4
99
9 Greens + 9 Reds Normal Normal C/1&2 D/3&4
100
1 orange Normal Normal D/1&2 D/3&4
* PB9…PB12  Pushbutton number.
* Normal  Normal momentary contact.
* A/1&2 ~ D/3&4  A/B pushbutton select function with designated LED indication.
4.1.7.3. Toggled Pushbutton with LED Indication – Inline Top/Bottom
Pushbutton Configuration
Set pushbutton toggled function (latching output relay) with LED
indications. LED 1 ~ 4 shown inside the shaded box illustrates
which LED on the transmitter lights up when the designated
pushbutton is pressed. Refer to section 4.2.4 JP4/JP5 inline
jumper settings.
Function
Number
Display Type PB1 PB2 PB3 PB4
1
1 Red Normal Normal Normal LED 4
17
1 Green + 7 Reds Normal Normal LED 3 LED 4
18
1 Green + 8 Reds Normal LED 2 LED 3 LED 4
19
1 Green + 9 Reds LED 1 LED 2 LED 3 LED 4