User's Manual

Flex ECO 4S/4X/8S/8X/12S/12X Instruction Manual
April 2015
Page 3 of 36
Table of Contents
Page
1. Introduction 4
2. Radio Controlled Safety 5
3. General System Information
3.1 Transmitter
3.1.1 External Illustration 9
3.1.2 Internal Illustration 10
3.2 Receiver
3.2.1 External Illustration 11
3.2.2 Internal Illustration 12
4. Function Settings
4.1 Transmitter
4.1.1 Enter Function Setting Mode 13
4.1.2 Channel Settings 13
4.1.3 Remote Pairing 14
4.1.4 Start Function Settings 15
4.1.5 Inactivity Timer Settings 15
4.1.6 Infrared Programming 15
4.1.7 Pushbutton Function Settings 16
4.2 Receiver
4.2.1 Channel Settings 18
4.2.2 Output Relay Configurations 18
4.2.3 Dipswitch Settings 22
4.2.4 Jumper Settings 24
4.2.5 Voltage Settings 25
4.2.6 Lights Indicator and Buzzer Installation 25
4.2.7 System Channels Table 26
5. Receiver Installation
5.1 Output Relay Contact Diagrams 27
5.2 Pre-installation Precautions 28
5.3 Step-By-Step Installation 28
6. Operating Procedures
6.1 General Operation 31
6.2 A/B Pushbutton Select Operation 32
6.3 A/B Rotary Select Operation 32
6.4 Pitch & Catch Operation 32
6.5 Changing Batteries 32
6.6 System Status Light Indications 33
7. General Specifications 35
8. EU Declaration of Conformity 36