User's Manual

Flex ECO 4S/4X/8S/8X/12S/12X Instruction Manual
April 2015
Page 17 of 36
4.1.7.3 Toggled Pushbutton with LED Indication – Inline Top/Bottom
Pushbutton Configuration
Set pushbutton toggled function (latching output relay) by configuring the 10-position
function dipswitch located inside the battery compartment. The “LED A” and “LED B”
shown inside the shaded box illustrates which LED on the transmitter will light up
when the designated pushbutton is pressed (PB11 & PB12). Refer to section 4.2.4
JP4/JP5 inline jumper settings.
* PB9…PB12 → Pushbutton number.
* Normal → Normal momentary contact.
* LED A & LED B → Pushbutton toggled function with designated LED indication.
4.1.7.4 A/B Pushbutton Select with LED Indication – Inline Top/Bottom
Pushbutton Configuration
There are 4 different types of A/B selector sequence available. Choose one that is
most suitable for your application. Refer to section 4.2.4 JP4/JP5 inline jumper
settings and section 5.1 output relay connections.
Type-A selector sequence : A → B
Type-B selector sequence : Off → A → B
Type-C selector sequence : A → B → A+B
Type-D selector sequence : Off → A → B → A+B
DIP PB9 PB10 PB11 PB12
1
1010010000 Normal Normal A/1&2 Normal
2
1010010100 Normal Normal B/1&2 Normal
3
1010011000 Normal Normal C/1&2 Normal
4
1010011100 Normal Normal D/1&2 Normal
5
0001111000 Normal Normal Normal A/1&2
6
0001111100 Normal Normal Normal B/1&2
7
0010000000 Normal Normal Normal C/1&2
8
0010000100 Normal Normal Normal D/1&2
* PB9…PB12 → Pushbutton number.
* Normal → Normal momentary contact.
* A/1&2 ~ D/1&2 → A/B pushbutton select function with designated LED indication.
DIP PB9 PB10 PB11 PB12
1
1001101000 Normal Normal
LED A
Normal
2
0000100000 Normal Normal Normal
LED B
3
1001101100 Normal Normal
LED A LED B