surgeassureTM Residential Surge Protective Device S50A User’s Manual surgeassureTM 14550 58th Street North Clearwater, Florida 33760 1.800.727.0669 - info@surgeassure.com - www.surgeassure.
Introduction Specifications Thank you for choosing the surgeassureTM S50A Residential Surge Protective Device. Temperature Operating -40oC (-40oF) to 60oC (+140oF) Temperature Storage -55oC (-67oF) to 65oC (+149oF) Save this manual! It includes instructions for obtaining warranty service and for returning a defective device. Please read and understand all information in this manual prior to installation. The procedures contained herein are not intended to supersede local or national electrical codes.
! WARNING VERIFY ALL POWER CIRCUITS ARE DE-ENERGIZED BEFORE MAKING CONNECTIONS The voltage rating of the device and system must always be verified before energizing the SPD. All electrical connections should be performed by a qualified (licensed) electrician. All wiring must comply with the National Electrical Code (NEC) and applicable local codes. • Maintenance of this Surge Protective Device should be performed by qualified electrical personnel only.
Dimensions and Weight Figure 3 4.13” Weight: 1.60 lbs (0.73 kg) 3.26” 3.31” 3.26” Limited Warranty 3.57” 3/4”-14 1.15” Sized for std 35mm DIN-rail Figure 4 • • • shows problems on startup, there is reasonable chance of bonding/grounding/misapplication issue. This permanently damages the unit. If not corrected, it will happen again.
