User's Guide

Version 1.6
Last updated: 2021-09-01
4
155 Gordon Baker Road Suite 301, Toronto, Ontario M2H3N5
Support contact: [e-mail] | 1-877-873-1942
www.aoms-tech.com
2 SET UP AND MOUNT LUMIHUB (SLIM MODEL)
2.1 INSTALLATION LOCATION
In typical construction sites our LumiHub covers a 500-meter radius. If a line of sight between the
LumiHub and a LumiNode can be maintained, up to 2km is possible from our previous site tests.
However, environmental factors particular to each job site can significantly reduce the coverage area,
such as:
 Job site layout
 Grading
 Equipment in use (Mobile generators and other radio equipment, for example)
 Line-of-sight obstructions by thick concrete slabs or walls
 Large bodies of water on the path between the LumiHub and LumiNode
Our recommendation is to mount the LumiHub on a high location, as exemplified in the pictures below
(Standard version of LumiHub is shown, but the principle still stands):