Product Info

BASIC CONFIGURATION
56
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
2. ALARM MODES
It defines the mode in which the driver is warned about the presence of personnel wearing an active PPE (TAG) within a
dangerous area.
The value, between 1 and 5, defines 5 modes referring to the time elapsed between one alarm sound and the next when
a dangerous condition remains. The time set is displayed with a message in yellow. (e.g., Sound alarm repetition time: 5)
To set the value, touch the editable field, which becomes yellow, and set a value between 1 and 5.
 Press ‘Audio Test’ to start a test (the 'Tag In' sound and the 'Tag Stay' sound will be reproduced consecutively).
 Press ‘Stop’ to finish the test.
The five alarm modes are summarised in the table below:
ALARM MODES
SOUND ALARM
REPETITION TIME (S)
TAG LAST
RECEPTION TIME (S)
TIME THAT THE
ALARM REMAINS IN
VIDEO (S)
TIME THAT
THE
ALARM REMAINS IN
THE LISTS (S)
1
5
3
3
10
2
15
3
3
30
3
30
3
3
60
4
60
3
5
60
5
1000
3
5
120
3. SOUND TYPE
The system manages 2 sound types:
 Tag In Sound (Tag detected)
 Tag Stay Sound (Tag already present in the activation range)
To set one of the 4 sets of pairs of sounds available, press on the editable 'Sound Type' field and set a value between 1
and 4.
 Press ‘Audio Test’ to start a test (the 'Tag In' sound and the 'Tag Stay' sound will be reproduced consecutively).
 Press ‘Stop’ to finish the test.