Product Info
AISLE MODULE
90
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
18.4 AISLE POWER SETTING | VEHICLE- VEHICLE
In this section, the sensor power can be changed as well as the detection distance of the worker's Tag if the vehicle is in
the aisle and the AISLE module is activated. The detection distance of the rest of the vehicles can be set too.
Firstly, press the 'MAN' key and carry out the operations in section 11.6.3 to set the sensor power compared to the
operator's Tag.
Then, press the 'VEHICLE' key and carry out the operations in section 13.3 to set the sensor power compared to the
vehicles.
Finally, set the AISLE power, that is, when the vehicle is in the aisle.
The value set must be between 0%รท100%, which will be added to or subtracted from the values of the MAN power
and the VEHICLE power that have been set.