Product Info

BADGE MODULE
76
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
15 BADGE MODULE
You can also log in to the system by means of the badge reader external to the system.
The driver is automatically identified and LOGS IN immediately after passing the badge over the reader connected to the
system.
15.1 INSTALLATION
Two (2) different types of readers can be installed: a serial reader and a USB reader for 125kHz/13.56MHz cards.
Check is there are any devices such as other 125kHz/13.56MHz badge readers or the Filter Sens module.
They may interfere with the operation of the badge module. If necessary, adjust the position of the devices in
order to reduce interference.
15.1.1 SERIAL READER
The code of the serial reader is 904.300.17 for 125 kHz RFID or 904.302.14 for ISO14443 A/B & ISO15693 RFID. Connect
this reader to the RS232 connector shown in section 8.3.2.
15.1.2 USB READER
The code of the USB reader is RDR-80581AK0; it can be connected to one of the USB ports available in the CPU.
15.2 VISUALISATION
When the system is turned on, the main interface presents a lateral red message inviting the user to LOGIN, which is
signalled by a yellow icon.
Press the yellow login icon- a closed padlock- to login, and enter your driver’s code/Tag code. Once the login is
complete, the icon will become grey, the symbol will turn into an open padlock, and the login word in red will
disappear.
For the LOGOUT operation, press again the grey icon and it will be yellow again.