Installation Manual

TURNING-ON AND CONFIGURATION
42
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
9.3.2 TAG DETECTION TEST
Move a Tag close to each of the sensors installed and check their operation.
The transponder detection in Pre-Warning is yellow. The yellow sectors correspond to the sensor that has detected the
Tag and indicate the Tag position with respect to the vehicle.
The transponder detection in Warning is red. In this case, the TAG position with respect to the vehicle is not indicated:
there is one single indication with a red ring.
In addition to the visual alarm, there is also a sound alert.
By default, the power of sensors is set to the minimum value; therefore, the detection distances are very short.