Installation Manual

TURNING-ON AND CONFIGURATION
40
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
9.2.6 STEP 6 | SEARCHING SENSORS BY POSITION
This step checks the correct operation of the sensors and saves them to the system. Press SENSORS SEARCH (STEP 4
screen). The search for sensors starts automatically.
If the ID search has been correctly performed, the selected sensors (e.g. 2, 5 and 8) will turn yellow.
Press the SAVE SETTINGS key: the colour of the sensors will change from yellow to green, and, as of that moment, the
sensors will be associated to the vehicle.
Press the BACK key to return to the previous menu.
Press the BACK key to return to the main menu.
Press SEARCH STARTING to repeat the operation, for example, when the selected sensors are not highlighted
in yellow, or if - once the procedure is completed - they are not green