Installation Manual

INSTALLATION ON THE VEHICLE
13
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
8 INSTALLATION ON THE VEHICLE
8.1 SYSTEM ARCHITECTURE AND GENERAL INSTRUCTIONS
The basic KIT of the EGOpro Safe MOVE 4.0 system that is installed on the vehicle consists of the following devices:
 3 Sensors
 1 HUB
 1 CPU
 1 Display
It is advisable to follow the workflow indicated in the following table and described in detail in the subsequent sections in
order to minimise installation problems.