Wiring Diagram

DATA SHEET OF THE COMPONENTS OF THE SYSTEM
134
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
25.4 HELMET TAG
Code
PLX TAGSAFETY 3TH
The helmet Tag has the same functions as the wearable Tag, but it has been designed to be affixed to safety helmets. It
uses two-antenna architecture for Pre-Warning located inside flexible wings fitted with suitable adhesive for polyethylene
and HD polyethylene, the material with which safety helmets are made. It is powered by a 2450 button cell battery that
is easy to replace. The Tag is put on the helmet in the way described in section 7.1.
TECHNICAL SPECIFICATIONS
SUPPLY VOLTAGE 3 V
MAXIMUM POWER 50mW
BATTERY 2450
OPERATING TEMPERATURE -20°C +60°C
DEGREE OF PROTECTION IP 55
WEIGHT (g) 75g
DIMENSIONS 362 X 24 X 76 mm
ACCESSORIES INCLUDED
Cleansing napkin
CR2450 BATTERY