Product Info

WI-FI MODULE
96
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
When the network is disconnected, these three
LEDs indicate the possible cause of the
problem. Errors are encoded using a binary code; the order of the LEDs follows the figure.
Flashing: 1 Off: 0
100 AT command failed
010 SIM card not detected
110 PIN code needed
001 PUK code needed
101 Registration failed
011 Module error
111 Not supported module
19.2 VISUALISATION
The icon of the Wi
-
Fi module is green: the system is sending data to the system; therefore, it is under the
Wi-Fi coverage needed to send data to the server.
The
icon of the Wi
-
Fi module is red: the system is not transferring data to the server. Check the
configuration of the modules used for the connection. If the module is the cellular router, also check that
the SIM and internet service provider settings match.
The configuration of the network parameters can be modified from the advanced menu of the system (contact technical
support for help).