Product Info

TRACKING ADAPTIVE RANGE MODULE
83
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
16.2.1 SENSORS NORMALIZATION
The 'Sensors normalization' function defines the detection distance when the vehicle is at standstill (speed=0 km/h).
In order to set the power level (range) or the detection distance, carry out the following operations:
 Position a Tag at the minimum distance at which it is intended to be detected when the vehicle is at standstill.
 Select the sensor to be configured
 Define the range by increasing or decreasing the power by means of the and keys in this menu until the
Tag is detected. Once set, changes are saved automatically.
Carry out the same operations for all active sensors.
NOTE: Use the 'Searching Tag' key every time the power is changed.