Installation Manual

OPERATION MODES
44
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
10.2 PEDESTRIAN WORKER’S TAG DISPLAY ALARM: PRE-WARNING
The presence of the pedestrian worker wearing an active TAG within the PRE-WARNING activation range is signalled to
the driver via the display that shows the position of the pedestrian worker around the vehicle.
Lighted up sectors are associated to the sensor and they are coloured according to the sensor detecting the Tag, and so
the pedestrian worker’s position.
The sector corresponding to the pedestrian worker’s position will remain YELLOW as long as the Tag is in this area.
If several pedestrian workers are found around the vehicle simultaneously at different positions, several sectors will be
lighted up on the display corresponding to the pedestrian workers.
The visual alarm is accompanied by two sound alarms that draw the driver’s attention. The first alarm, which is loud, is
emitted when the pedestrian worker enters the PRE-WARNING area, and the second alarm, which is low, reminds that
the pedestrian worker is still within the detection area.
In addition to a visual and sound alarm on the display, the system also activatesa a relay of the CPU.
All these alarms can be configured in the ALARM CONFIGURATION section.