Installation Manual

INSTALLATION ON THE VEHICLE
28
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
8.5 EXPANSION OF THE NUMBER OF SENSORS
The system can manage up to a maximum of 8 sensors. To add additional sensors to the basic kit, one or more splitters
must be installed, as required:
- up to 6 sensors, one splitter is needed
- for 7-8 sensors, two splitters are needed
The splitter must be connected to one of the 3 ports available in the HUB, and this makes 4 ports available for connecting
just as many sensors.
Find below an example of the configuration of an EGOpro Safe Move system with 8 sensors.
SPLITTER 1
SPLITTER 2
HUB
LED TX
LED RX
J1
J2
J3
J4
J5
LED PWRON
F2
F1 F3
F4
SENSOR PORTS
HUB INPUT