Installation Manual

INSTALLATION ON THE VEHICLE
26
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
8.4 INSTALLING THE SYSTEM WITH M12 CONNECTORS
The PLX SAFEMOVE SENS 4 and PLX SAFEMOVE HUB 4 devices are available in a version fitted with M12 connectors.
Such version has been designed in order to make the system installation and removal simpler and quicker.
The table below summarises the codes used in the system fitted with connectors.
DEVICE
CODE
HUB
PLX SAFEMOVE HUB 4M
SENSOR
PLX SAFEMOVE SENS 4M
CABLE
POLES
LENGTH (m)
AWG
CODE
RJ45-M12f CPU-HUB CONNECTION CABLE 8 5 24 M12AFRJ45CABLE5M
M12m-M12f HUB SENSOR CONNECTION CABLE 8 5 24 M12AMFCABLE5M
HUB POWER SUPPLY AND RELAY CONNECTION CABLE 12 5 24 M12AFPAN12P5M
The section below indicates the functions of the different connectors and connections for the HUB power supply and relay
1
HUB power supply and relay
connector
2
Connector for HUB-CPU
connection cable
3
Connection connectors
towards sensors