Installation Manual

TABLE OF REVISIONS
2
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
TABLE OF CONTENTS
1 TABLE OF REVISIONS 6
2 CONFORMITY 7
3 SAFETY INSTRUCTIONS 7
3.1 DISPOSAL 7
3.2 LIMITATIONS FOR USE 7
3.3 STATEMENTS FOR THE USE IN NORTH AMERICA 7
3.3.1 STATEMENTS FOR PLXSAFEMOVESENS4 AND PLXSAFEMOVESEN4M. 8
4 INTRODUCTION 8
4.1 INTENDED USE 8
4.2 SYMBOLS 8
5 BASIC KIT COMPONENTS 9
6 SYSTEM OPERATION 10
6.1 PEDESTRIAN WORKER PRE-WARNING 10
6.2 PEDESTRIAN WORKER WARNING 10
6.3 VEHICLE-VEHICLE WARNING 10
7 PLACING TAGS 11
7.1 HELMET TAG FITTING 11
7.2 WEARABLE TAG ACCESSORIES 11
7.3 PROCEDURE FOR CHANGING THE BATTERY 12
8 INSTALLATION ON THE VEHICLE 13
8.1 SYSTEM ARCHITECTURE AND GENERAL INSTRUCTIONS 13
8.2 POSITIONING THE DEVICES 15
8.2.1 POSITIONING THE CONTROL UNIT (CPU) 16
8.2.2 POSITIONING THE DISPLAY 17
8.2.3 POSITIONING THE SENSORS 17
8.2.4 POSITIONING THE HUB 18
8.3 CONNECTIONS 19
8.3.1 GENERAL INSTRUCTIONS 19
8.3.2 CPU WIRING 21
8.3.3 CONNECTING SENSORS 22
8.3.4 CONNECTING THE HUB 24