Installation Manual

SYSTEM OPERATION
10
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
6 SYSTEM OPERATION
The solution offered by the EGOpro Safe MOVE 4.0 proximity warning & alert system minimises the potential for accidents
between forklifts and operators on foot in common working areas. Through visual and sound alarms, the system warns
the driver, in real time, of the presence and position of pedestrian workers wearing active PPE who enter the danger
zones around the vehicle in motion.
With the system, the driver can promptly take the most appropriate safety measures to avoid hitting other pedestrian
workers or other vehicles.
Thanks to a multifunction sensor, the system detects pedestrian workers wearing a TAG, in two stages:
6.1 PEDESTRIAN WORKER PRE-WARNING
PRE-WARNING| The activation range can be configured up to 50 m with the control of a relay contact.
By means of a visual and sound alarm, the system warns the driver about the presence and position of the pedestrian
worker.
6.2 PEDESTRIAN WORKER WARNING
WARNING| The activation range can be configured up to 5-m with the control of a contact relay.
By means of a visual and sound alarm, the system warns the driver about the presence of the pedestrian worker with a
red circle and by switching on the lateral LEDs.
6.3 VEHICLE-VEHICLE WARNING
VEHICLE-VEHICLE WARNING| When a vehicle equipped with the EGOpro Safe MOVE 4.0 system gets into the sensor
activation area. The activation range can be configured up to 100 m.
By means of a visual and sound alarm, the system warns the driver about the presence and position of the other vehicle.