Wiring Diagram

DATA SHEET OF THE COMPONENTS OF THE SYSTEM
133
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
25.3 WEARABLE TAG
Code
PLX TAGSAFETY 3T
Clip for band
Slot for strap
Snap fastener
Use
the screws supplied: 2.2
X7
Use the screws supplied: 2.2
X6
Use the screws supplied: 2.2
X7
With the wearable Tag, pedestrian workers can be detected by the EGOpro Safe MOVE 4.0 system either in Pre-Warning
or in Warning. The Tag is powered by a lithium button cell battery that is easy to replace.
The case is ergonomic and its upper cover is made of rubber. It is supplied together with a series of accessories thanks to
which it can be worn in different ways, such as neck strap, waist clip and snap fastener.
TECHNICAL SPECIFICATIONS
SUPPLY VOLTAGE 3 V
MAXIMUM POWER 50mW
BATTERY TYPE
2450
OPERATING TEMPERATURE -20°C +60°C
DEGREE OF PROTECTION IP 55
WEIGHT 65g
DIMENSIONS 50mm X 24mm X 66mm
ACCESSORIES INCLUDED
WAIST CLIP
RING FOR STRAP
SNAP FASTENER
CR2450 BATTERY