Product Info

WI-FI MODULE
91
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
19 WI-FI MODULE
With the WI-FI module, after a hardware module is installed, data can be automatically downloaded, directly to the server,
and the system can be remotely controlled.
19.1 INSTALLATION
19.1.1 WI-FI ANTENNA
Ubiquiti BULLET M2-HP
The Wi-Fi module must be connected directly to the LAN port of the CPU. The default LAN features a POE, so no external
power is required.
This module is used to connect the system to the Wi-Fi network. Depending on what is needed, the module can be
configured as access point, client or bridge.
To configure the module, refer to the dedicated manual of the module. The configuration can be made directly by
connecting a module to a PC (use a Ubiquiti POE-15-12W power adapter; not supplied), and access the configuration page
via any browser by typing: https://192.168.1.1
Enter ubnt in the username and password fields.