Product Info

AISLE MODULE
87
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
18 AISLE MODULE
Find below the codes associated to this module.
Code
Quantity
Description
GECMPPF204530
3
UB1000 Ultrasonic sensor
GECMPPF116454
2
5
-
pole M12 cable for ultrasonic sensor; 10
m
SWAISLE
1
Software module
The AISLE module includes the proximity sensor that must be fitted correctly at the sides of the vehicle. With this
device, the system can capture information if the vehicle is, for example, inside the aisle of the warehouse, and
therefore, visibility is poor.
18.1 INSTALLATION
Connect the cables supplied to the two sensors on both sides of the forklift truck.
Connect the cables according to the description explained, and connect the two sensors in parallel.
Sensor PIN
Function
Ca
ble colour
Connect to
1
V+
brown
Voltage +Vq (under CPU panel) 24Vdc max
3
V
-
blue
CPU power negative pole (GND)
4
Out
black
CPU C1 or C2 input (I/O connector)
For further functions and for programming the sensor, refer to the manual included in the package.